TT C5 roll cage install

As the latest step in this ever-evolving project I decided tot install a S&W race cars roll-bar. I’d say this is not a good project for the regular weekend warrior, as intense modification to the frame of the vehicle is required. Total install time was in the 100 hour range.

Step 1.

Gut the car. Remove anything flammable from the interior. Zip tie all wires, computers, etc. up and out of the way.

Step 2.

Sand, prime, and paint all of the bars that you are going to be installing. You will be grinding some of this back off and doing a final touch up in the car, but good prep work gives the best end results here. Powder coating would be another option.

Step 3.

This is where it gets a little tougher. Because the S&W cage ties into the frame rails at 6 points, it’s necessary to cut some access holes in the [...]

26 inch Lexani wheels

4″ belltech drop

I have worked extensively with the dynojet power commander and have tuned my own bikes many times. From an everyday cruiser to full on road racing I can design a program to work for you.